Your conversion rate is 1%. Is that bad?
Maybe. And that is exactly the problem with generic conversion rate comparisons: the same number means something completely different for two stores.

Jason Spizert
Updated on October 21, 2026
Published 6 min read
The short answer
There is no number that applies to every store. Many online stores land roughly in the low single-digit percentage range, but price, product, where visitors come from and device shift the number a lot. Use benchmarks as orientation; the trend of your own store tells you more.
First, the number itself: if 100 people visit your store and one person buys, your conversion rate is 1 percent.
How 1 percent comes about
1%
100 visits, 1 purchase.
Purchases ÷ visits × 100. Shopify calculates this for you in Analytics.
The harder question comes next. Most people google "good conversion rate", find 2.5 percent in some table, compare their 1.0 to it and decide something is broken.
Your conversion rate is not a school grade.
A benchmark is orientation, not a report card. It does not tell you whether your number is fine under your conditions.
Two stores, the same number, two different stories
Picture two stores. Both sit at exactly 1.0 percent:
Store A
1.0%
- Product
- €900 piece of furniture
- Visitors
- mostly cold Meta ads
- Buying decision
- rarely made right away
1% is hardly surprising here.
Store B
1.0%
- Product
- €39 repeat-purchase item
- Visitors
- mostly brand searches and returning customers
- Buying decision
- usually within a few minutes
Here I would take a closer look at 1%.
At Store A, most people see the brand for the first time in an ad, and the piece of furniture is expensive. Store B sells a €39 item, and many visitors already know the brand. There I would look at 1 percent more critically, because more could be expected. Same number, a completely different story.
Still, briefly: the rough orientation
Many online stores land in the low single-digit percentage range. Shopify itself cites benchmarks like these and points out in the same breath that industry, product, price and where visitors come from make big differences (Source: Shopify Germany benchmark article, January 22, 2026). If a blog says 3 percent, there is no need to send your store at 2.7 in for inspection.
A simple calculation shows how much the origin of your visitors alone shifts the number. This is exactly what happens when you run more ads, as described in the article on the cost of Meta ads:
One store, two sources, one number
Constructed example, not measured data.
Four things that shift your number
They explain most of the differences between two stores, and often the movement in your own.
01
Where your visitors come from
Someone who types your brand name into Google already knows you. Someone who sees you for the first time in a TikTok ad does not. Put both into one number and you get an average that is true for neither.
Check: Look at the rate separately for your two biggest sources.
02
How big the buying decision is
A €30 item is often bought on the first visit. A €900 piece of furniture rarely is. That does not mean "expensive equals bad rate", but it changes what you can expect from the number.
Check: Be honest: do people buy your product on impulse or after thinking it over?
03
Which device people buy on
If 80 percent of your visitors come on mobile and your store is clunkier there, that drags down the overall number, even if everything runs well on desktop.
Check: Split Shopify Analytics by device and compare both values.
04
How your own store is developing
The most important point. If you sat at 1.8 percent for eight weeks and are now at 1.1, that is a far more interesting signal than any outside average.
Check: Look at the trend over the last 8 to 12 weeks, not just this week.
Why the numbers in Shopify, GA4 and your ad accounts never quite match is explained in the article on Shopify, GA4 and Meta.
The better comparison is you
Compare your conversion rate with your own store first, and with general benchmarks only after that.
Your last eight weeks
An average from the internet knows neither your product nor your customers. If the number was stable for weeks and is now falling, you have a concrete lead.
What your situation is telling you
Four typical cases and the sensible next step:
01Low, but stable for months
Check the context first: price, product, where your visitors come from. No reason for knee-jerk action.
02Suddenly dropped
Find out what changed: a new campaign, a new audience, changes to the store, holidays.
03Only one source stands out
Look at that source on its own. The overall number is then just an average of good and bad.
04Lots of visitors, hardly any purchases
Now the number really is a red flag. Next, you look for the point where people drop off.
When the number really stands out
Then comes the next question: where are you actually losing people?
A low rate tells you that something is off, but not where.
Schematic without values. A low rate tells you that people leave, not where.
Lots of traffic, no sales: how to find where your store really loses revenue
What I would check on Monday morning
Five steps, one fork in the road
What a change in the rate means financially: it is the most direct lever on ROAS. Going from 1.2 to 1.5 percent means a quarter more revenue from the same ad budget, worked out in ROAS: formula, calculation and why the number can mislead. Whether a change to your store really lifts the rate is shown by an A/B test, and how we set that up as a program is described on our conversion optimization page.
The question is not whether you have the perfect conversion rate. The question is whether you understand why it looks the way it does right now.
If you know your store gets traffic but not where exactly it loses revenue, the sensible next step is not another tactic. It is a structured diagnosis.
That is exactly what our store audit does: we work through the order of checks from this guide with your real data. Step 1 is validating the tracking, because otherwise every further analysis stands on the wrong foundation.
- 01Check data and tracking
- 02Locate the break point
- 03Clearly prioritized results with a next test











